Bosch C 80 Manual page 29

First Steps | 8
The mounting location is now stored in the device. The device will do a reset and the
'RUN' LED on the device will change to green. The list will show the new mounting loca-
tion assignment.
It is good practice to physically label the C 80 with its mounting location. Now the device
is ready to be used.
A different coloring of the C 80 is used to indicate that the device is already configured in
the currently loaded RaceCon project or not (white/orange).
A conflict of several connected C 80 using the same location is indicated by red coloring
the involved devices:
Bosch Motorsport Manual_C_80 29 / 144