Bosch C 80 Manual page 123

17.7.2 Functionality and channel outputs
Bosch Motorsport
Distance or
Intermediate
Trigger
For the distance mode, you need to check on an old lap or estimate how long it takes to
travel the segment distance. Please enter those values into input field. The values can also
be copied and pasted to the input field from an excel sheet as a normal text. In the inter-
mediate trigger, you just need to set the expected time the driver takes to reach the seg-
ment trigger.
Note
Please note that the segment time and length is always measured from the start line or
where the main lap trigger is set.
Following output channels are generated by the predated laptime function.
Laptrigger_lapdiff_pred_dls
Laptrigger_lapsegdiffpred_dls
Laptrigger_Lapcurrpred_dls
The channel Laptrigger_lapdiff_pred_dls is updated as soon as the main lap trigger is re-
ceived. Both other channels are updated as soon as the next segment distance is travelled
or the next intermediate trigger is received.
Laptime difference between the predated
and the last laptime
lagseg difference between the last segment
and the predated segment.
Estimated laptime of the current lap, based
on the predated laptime and the predated
segment deviations
Manual_C_80
Lap Trigger | 17
123 / 144