Table of Contents
Advertisement
12 | Analog and Frequency Inputs
62 / 144
A "Characteristic Curve Wizard" opens.
4.
To activate the internal pull up-resistor, check the box. The C 80 pull up-resistor is
used to get a 5 V signal at the analogue channel of the C 80. It allows you, to use a
push-button. The fixed value of the internal pull up-resistor is 3,010 Ohm. If using an
additional external pull up-resistor, set up the overall resistance.
5.
Click 'Next' when done.
The second part of the "Sensitivity/Offset Wizard" opens.
Manual_C_80
Drag + Drop
Bosch Motorsport
Advertisement
Table of Contents
