Swing Louvre Direction; Swing Louvre Direction - Hitachi PSC-A32MN Operation Manual

7.8 Swing Louvre Direction
<Monitor (All Groups)>
(1)
(3)
NOTES:
• By tapping "<" or ">" at the detailed setting screen, the Swing Louvre Direction will be switched to another group
in the same block.
• Control Restricted (Run/Stop Only) : In case of "Enable", each Setting Change is for all Groups or Blocks.
Setting Change is not possible for each Group.
• Depending on the model of the Air Conditioner, the setting may not be possible or may be calibrated
automatically.
• Louvre position on LCD and the actual louvre position do not always match during the auto swing operation.
• The actual Swing Louvre Direction may not stop immediately after the switch is pressed.
• If the settings are mixed when multiple groups are selected, the display will remain blank.
16
<Monitor (Block)>
(1)
(2)
(1) Select the target group at screen of
"Monitor (All Groups)" or "Monitor
(Block)" to change the swing louvre
direction.
The pop-up of "Setting" for the
selected group is displayed on the
touchscreen.
(2) By tapping " " or " " of the
"LOUVRE", the swing louvre
direction will be changed alternately
as follows.
LCD
Indication
AUTO
COOL Auto
Angle Range
DRY Swing
Auto Angle Range
HEAT
FAN Swing
: Auto swing operation will be
started.
AUTO
(3) Tap "Monitor screen" to return to
Monitor screen.
P5415644