7.5 Run/Stop for Each Group
The mode is different depending on the setting of the Control Mode (Run/Stop Only).
Control Restricted (Run/Stop Only) : Control Method when set as "Disable" Refer to the item 7.5.1.
Control Restricted (Run/Stop Only) : Control Method when set as "Enable" Refer to the item 7.5.2.
7.5.1 Run/Stop for Each Group (Control Restricted (Run/Stop Only) : "Disable")
<Monitor (All Groups)>
(2)
(3)
12
<Monitor (Block)>
(1)
(1) Select the screen of "Monitor (All
Groups)" or "Monitor (Block)".
(1)
Select the group to set by tapping
the group button.
(2) Selected group setting will be
indicated on the touchscreen
display. Tap "ON" or "OFF".
(3) Tap "Monitor screen" to return to
Monitor screen.
P5415644