Display Of Specified Block; Display Of Specified Block - Hitachi PSC-A32MN Operation Manual

7.2 Display of Specified Block
<Monitor (All Groups)>
(2)
NOTE:
• The touchscreen display will automatically sleep when the touchscreen is not operated for the given length of
time.(To wake up, tap the screen.)
• It may take time to display the temperature.
• The inlet temperature is displayed only while operating.
P5415644
<Monitor (Block)>
(1)
(4)
(1) Select the target block from the
screen of "Monitor (All Groups)" or
(1)
"Monitor (Block)".
(2) The groups in the selected
block will be displayed on the
touchscreen.
Each operation status is indicated
by color of the group button as
follows:
Green: Run
Gray: Stop
Red: Abnormal
* "Block" screen may be different
depending on the Control Pattern.
The screen on the left indicates
the Pattern A
(4 Blocks × 8 Groups) set by the
Control Pattern.
(3) Tap "Air Temp Display" to display
the outside air temperature and the
inlet temperature.
(4) Tap "Display Condit." to display the
condition of the operation.
(3)
9