Audio Modes; Using A Wired Headset - Motorola FR6874 User Manual

Audio Modes

The FR6874 offers three audio modes for use during phone calls:
•
Handset Mode: Switches audio to the speaker at the top front of the FR6874, so you can use the FR6874
as a handset. This is the default mode.
•
Speaker Mode: Use the FR6874 as if on speaker phone. Tap the Speaker On button to activate this mode.
Tap the Speaker Off button to switch back to handset mode.
•
Headset Mode: Connect a wired or Bluetooth headset to automatically switch audio to the headset.
The FR6874 defaults to handset mode. When a wired headset is plugged into the FR6874 audio connector
or a
Bluetooth headset is configured for use with the FR6874, the earpiece and speakerphone are muted and audio is
heard through the headset.
NOTE
Handset Mode
Audio Modes
Figure 5-3

Using a Wired Headset

You can use a stereo headset for audio communication when using an audio-enabled application. To use a
headset, plug the headset jack into the audio connector on the side of the FR6874. Set the FR6874's
volume appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker.
For the best audio performance, Motorola recommends a 2.5mm jack headset, see Accessories on page 1-3.
While using a Bluetooth headset during a call, the mobile computer will not go into suspend mode.
Speaker Mode
68
Using the Phone
Headset Mode