Sample Keyboard Operating Instructions - Philips Allegiant LTC 8500 Series Instructions For Use Manual

Sample Keyboard Operating Instructions

(The information below can be used for reference and as a training aid.)
1. MANUAL CAMERA SWITCHING
(To view another camera)
Select the camera number you wish to view
using the numeric keypad and press the ENTER
key. The selected camera will then appear on the
monitor.
2. SWITCHING CONTROL
MONITOR (To change to a different monitor
on which cameras may be viewed/controlled)
Press the MONITOR key, then select the monitor
number you wish to control using the numeric
keypad. Then press the ENTER key. The
keyboard display will now indicate the selected
monitor number and the camera currently
displayed on that monitor.
3. LOCKING/UNLOCKING A RECEIVER/DRIVER
(Restricts other operators from controlling
the selected pan/tilt/zoom camera)
Press the LOCK key, then press the ON key (or
OFF key to unlock the camera). Note the status
area of the monitor overlay display between the
camera number and the time. This area will now
R
show a " " indicating the camera is locked. This
L
will prevent other operators (unless they have a
higher priority) from controlling the pan/tilt/zoom
camera currently being viewed. Remember to
unlock the camera before moving on to the next
step.
4. LOCKING/UNLOCKING A MONITOR
(Restricts other operators from switching
video on the desired monitor)
Press the MONITOR key, press the LOCK key,
then press the ON key (or the OFF key to unlock
the monitor). The status display of the monitor
overlay will now show a "
monitor is locked. This will prevent other
operators (unless they have a higher priority)
from changing the video on the monitor being
used. Remember to unlock the monitor before
moving on to the next step.
APPENDIX B
TO ANOTHER
M
" indicating the
L
80
5. PROGRAMMING A PRE-POSITION
CAMERA SCENE
(Stores the current position of a properly
equipped pan/tilt/zoom
automatic recall)
Select a camera having pan/tilt/zoom control
(with pre-position options) as described above.
Using the joystick and lens controls, adjust the
camera to view the scene you wish to store.
Press the SET key, then select the scene
number using the numeric keypad and press
ENTER. The camera position will now be stored
in memory.
6. RECALLING A PREVIOUSLY STORED
PRE-POSITION CAMERA SCENE
(To recall the pan/tilt/zoom camera position
stored in the previous step)
Select the camera to be activated. Press the
SHOT key, then select a previously stored
camera position number using the numeric
keypad. Press ENTER.
automatically return to the previously stored
position.
7. LOGGING-OFF TO SECURE SYSTEM
(To prevent unauthorized access to system
operations)
If this system feature has been enabled,
operators may secure access to the system be
pressing the USER key, then the OFF key. The
operator will then be logged-off the system and
the keyboard will
commands.
8. LOGGING-ON TO THE SYSTEM
(To regain access to the system)
If the keyboard indicates a logged-off state
(USER and OFF indicators are lit), an operator
may log-on by pressing the ON key, a user
number (1 to 32), the ENTER key, the correct
password number (the default is the same as the
user number), and ENTER again. The keyboard
display will now indicate an active monitor and
camera number.
camera for later
The camera will
no longer respond to