Keyboard User Functions; General - Philips Allegiant LTC 8500 Series Instructions For Use Manual

General

User functions are keyboard operations which are
used infrequently and do not demand their own keys.
The various functions are listed in the table below.
Note that certain functions are restricted to certain
user priority levels. Information on user priority levels
can be found in the section on User Information. To
execute these user functions, select the desired
function, then follow the steps below. Each function
is described in its own section with additional
instructions.
1. Press USER and verify the indicator lights above
the key.
Joystick
Fn# Up/Down
1 n/a
2 n/a
3 n/a
4 Up/down
5 Brightness
6 Time/date On/Off
7 Set
8 Set
9 Set
10 n/a
11 Select
12 n/a
13 Select
14 n/a
15 n/a
16 Select
17 Set
18 Select
19 Select
20 Select
21 Select
22 Select
23 n/a
24 Up/down
25 Brightness
26 Time/date
27 Keyboard Log-in
28 Console Log-in
29 Default Parameters
30 Console Parameters Select
31 Printer Parameters
32 Alarm Parameters
33 n/a

KEYBOARD USER FUNCTIONS

Joystick
Left/Right
n/a
n/a
n/a
Left/right
Msg vs. Stat
Overlay On/Off
Select
Select
Select
n/a
n/a
n/a
n/a
n/a
n/a
Enable/Disable
Select
n/a
n/a
n/a
n/a
n/a
n/a
Left/right
Msg vs. Stat
Overlay
Select
Select
Select
Select
Select
n/a
2. Key in the desired user function number using
the numeric keypad.
3. Press ENTER. Note that the keyboard camera
display will show a "F" followed by the function
number selected.
4. Follow the directions for the specific user
function as described in its own section.
5. Press USER to exit back to normal mode.
EXAMPLE: USER 1 ENTER
The above example will access user function #1
as described in the section below.
Function Description
Local keyboard test
Show keyboard port number
Select keyboard beeper on/off
Adjust position of monitor display
Monitor display brightness / status selection
Select monitor display option
Set time
Set date
Set Camera ID
Change user password
Select Time/date format
Default all monitor overlays
Print configuration tables to system printer
Reserved
Reset system (password required)
Time Event Enable/Disable
Set Monitor ID
Print Sequence
Select alarm response (password req'd)
Select printer verbosity
Designate alarm monitor type (password)
Select control code format (fixed/variable)
Display CPU software version number
Set positions on all monitor displays
Set brightness on all monitor displays
Set display options on all monitors
Select Keyboard Log-in mode
Select Console Log-in mode
Default RS-232 Parameters
Set Console RS-232 Parameters
Set Printer RS-232 Parameters
Set Alarm RS-232 Parameters
Display User Number and Priority
58
Access Level
1 2-7 8
Y Y Y
Y Y Y
Y Y Y
Y Y N
Y Y N
Y Y N
Y Y N
Y Y N
Y N N
Y Y Y
Y N N
Y N N
Y N N
-- -- --
Y N N
Y N N
Y N N
Y N N
Y N N
Y N N
Y N N
Y N N
Y Y Y
Y Y N
Y Y N
Y Y N
Y N N
Y N N
Y N N
Y N N
Y N N
Y N N
Y Y Y