Philips Allegiant LTC 8500 Series Instructions For Use Manual page 80

Pan/Tilt/Zoom
Allegiant
and Satellite
Main CPU Bay
Control Data
TC8568 Signal
Distribution Unit
To Any Local
Pan/Tilt/Zoom
Camera Sites
Up to 1.5 km (5000 ft)
Using 1 sq mm (18 AWG)
Shielded Twisted Pair
(Belden 8760 or Equivalent)
1 Line to Each Remote
Satellite System Location
Pan/Tilt/Zoom and
Satellite Control Data
Any Model
Allegiant
Main Bay
Satellite
Data Line
TC8780
Data Converter
Unit
To Any Local
Pan/Tilt/Zoom
Camera Sites
TC8569 Code
Merger Unit
Local Pan/Tilt/Zoom
Control Data Line
TC8550 Series Keyboard Controls Any of the Local Cameras on
Any of the Local Monitors (Video and Pan/Tilt/Zoom)
Conceptual Diagram of Allegiant Satellite Switching System
Monitor Outputs
Inputs Used for Both
Local and Trunk Lines
Multiple Video Trunk Lines From
TC8550 Series Controls Any
Each Remote Satellite Location
Local or Remote Camera
On Any Local Monitor
(Video and Pan/Tilt/Zoom)
Monitor Outputs Used As Video
Trunk Lines to Main Control Site
Console
Port Input
78
TC8540 Series
Alarm Interface
Unit
Alarm Inputs May Activate
Either Local or Satellite
Video on Main Control
Center's Monitor
Local Camera
Video Inputs
Multiple Video Coax
Video Trunk Lines From
Other Satellite Locations
Local Monitors
TC8540 Series
Alarm Interface
Unit
Alarm Inputs Activate
Only Local Video on
Local Monitors
S932A11BE