Mitsubishi Electric MELSEC-Q Structured Programming Manual page 301

FXCPU Structured Programming Manual
[Device & Common]
2. Click "Operation Setting" in the "Setting Contents" column on the "Network Parameter - CC-
Link Module Configuration" dialog box.
Set item
Parameter Name
Data Link Disorder
Station Setting
Case of CPU STOP Setting
3. Click the [OK] button to finish the setting and close the "Operation Setting " dialog box.
Contents of setting
Set the parameter name.
Set whether or not the input data status from a data link
disorder station is held.
Set the slave station refresh/compulsory clear setting at
programmable controller CPU STOP.
6 Types and Setting of Parameters
6.6 Parameter setting by GX Works2
Setting range
8 half-width characters
"Hold input data" not checked: Clear
"Hold input data" checked: Hold
"Clears compulsorily" not checked: Refresh
"Clears compulsorily" checked:
Clears compulsorily
1
2
3
4
5
6
7
299