Panasonic KX-TVM50 Programming Manual page 144

2.6 Hardware (H/W) Settings
Value Range
-24–+6 dBm
Duration
Specifies the duration (length) of the beep tone.
Value Range
200 ms–2800 ms, Units 200 ms
Interval
Specifies the length of time between beep tones heard during 2–way recording.
Value Range
0 s–60 s
DTMF Cut Length
Specifies the length of time for DTMF to be deleted when it is detected while recording.
Value Range
110 ms
Minimum Message Length
Specifies the minimum message recording length. Messages shorter than the specified minimum
recording length are discarded from the mailbox.
Value Range
2 ms
Call Progress Tone Detection for Inband Mode
Specifies whether to detect "Call Progress Tone". When the integration mode is Inband mode, the
VPS detects DTMF Tone and Call Progress Tone simultaneously.
Value Range
Disable, Enable
Port Parameters
Port parameters determine the hardware settings for each VPS port. Parameter can be edited for
each port individually or for multiple port simultaneously.
Follow the steps below to edit multiple ports simultaneously:
1
Click Click to Edit....
144 Programming Guide