Chapter 2 Convenient Features
1.
System BIOS
You can check and change the parameters using the BIOS Setup utility (SETUP).
1.1
Starting SETUP
Turn on the server and proceed with POST.
Wait until the following message appears at the bottom left of the screen.
Press <F2> SETUP, ... (* a different message may appear depending on the environment)
If you press <F2>, SETUP will start after POST, and the Main menu will appear (if you press <F2> while the
NEC logo is on the screen, SETUP will start).
1.2
Parameter Descriptions
The SETUP utility has the following six major menus.
•
Main menu
•
Advanced menu
•
Security menu
•
Server menu
•
Boot menu
•
Save & Exit menu
These menus have their submenus for relevant items. Selecting submenus allows you to configure further
detailed parameters.
The following describes available functions and parameters, as well as the factory settings, for each menu.
56
Express5800/B120e-h Maintenance Guide
1. System BIOS