Using Offline Tools From Pc For Management; How To Remotely Control; Preparation - NEC Express5800 Series Maintenance Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 1 Maintenance
9.3
Using Offline Tools from PC for Management
The Off-line Tools can be remotely controlled from PC for Management without requiring keyboard or other
consoles to be connected.
9.3.1 How to remotely control
Control from a LAN connected PC for Management using the remote KVM of EXPRESSSCOPE Engine 3.
For details of the remote KVM, see "EXPRESSSCOPE Engine 3 User's Guide" in EXPRESSBUILDER.
You can also control Off-line Tools remotely by using BIOS Console Redirection.
9.3.2 Preparation
Set the remote management feature of EXPRESSSCOPE Engine 3 in advance to check hardware error
information during console-less operation.
For settings information, see "EXPRESSSCOPE Engine 3 User's Guide" or NEC ESMPRO Manager online
help.
54
Note
Connect the LAN cable to the connector on management LAN port. Or, if Shared BMC
LAN feature is used, connect the LAN cable to the corresponding LAN connector.
Express5800/B120e-h Maintenance Guide
9. Offline Tools
Advertisement
Table of Contents
