Chapter 2 Convenient Features
(3)
Priority specification
For setting and displaying the priority of the background tasks (Rebuild, Patrol Read, and Consistency Check)
for the RAID Controller, the WebBIOS uses numerical values while the Universal RAID Utility uses three levels
of high, middle, and low. The table below shows the correspondence between the numerical value ranges and
levels for each item. .
•
Correspondence between the setting values for the WebBIOS and the display levels for the
Universal RAID Utility
Item
Rebuild priority
Patrol Read priority
Consistency Check priority
•
Values to be set when changing the level with the Universal RAID Utility
Item
Rebuild priority
Patrol Read priority
Consistency Check priority
110
Setting values of the
WebBIOS
80 to 100
31 to 79
80 to 100
31 to 79
80 to 100
31 to 79
Selection levels of the
Universal RAID Utility
•
Tips
The WebBIOS can specify the background initialization priority, but the Universal
RAID Utility cannot.
•
Although the Universal RAID Utility can specify the priority of initialization (Slow
Initialize), this server does not support this function.
Express5800/B120e-h Maintenance Guide
Display levels of the
Universal RAID Utility
Middle
0 to 30
Middle
0 to 30
Middle
0 to 30
Setting values
High
Middle
Low
High
Middle
Low
High
Middle
Low
4. RAID System Configuration
High
Low
High
Low
High
Low
90
50
10
90
50
10
90
50
10