NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Prerequisites
Before connecting power cables, use a multimeter to check that there is no
voltage between conducting wires and between conducting wires and the ground.
Procedure
Step 1 Take out OT terminals and cord end terminals from the fittings bag, and prepare
cables.
● Crimp the cables firmly and ensure that they are not loose after pulling.
● If the cables are not recommended specifications, you need to prepare the
terminals by yourself.
Step 2 Remove the cover of the electric control box.
1.
2.
3.
Figure 3-49 Removing the cover of the electric control box (NetCol5000-C065)
Issue 04 (2021-03-15)
NO TICE
NO TICE
Remove the four screws from the cover of the electric control box using an
M5 screwdriver.
Push the cover upward and take out the cover from the positioning pins.
Pull the entire cover out of the cabinet.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
68