How Do I Export Data - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
To prevent key data from being lost, you are recommended to record all
parameter values or back up data with export configurations before restoring
defaults. Then change the parameter values back to the recorded values after
restoring defaults. For details about how to use export configurations, see
How Do I Export

7.1.17 How Do I Export Data?

Context
One-click export allows you to export current alarms, historical alarms, and logs.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Procedure
Step 1 Choose Maint > USB Operations > Export to enter the Select Path screen.
Step 2 Tap the file where the user saves current data in the Select Path dialog box and
tap Next. Then tap Yes in the displayed dialog box.
Step 3 After the data is successfully exported, tap Finish.
Step 4 On the home screen, choose Maint > USB Operations > Remove USB to remove
the USB flash drive in safe mode.
----End
Issue 04 (2021-03-15)
NO TICE
Data?.
NO TE
After default settings are restored, all communication addresses are changed to 1 and the
communication between all devices and the NMS is disconnected. The communication
addresses must be reset to recover the communication.
NO TICE
NO TE
● Before exporting active alarms, historical alarms, logs, and configurations, ensure that
the USB flash drive has been successfully identified. The USB port is located on the side
of the main control board.
● If the USB flash drive has been successfully identified,
● If the USB flash drive is not properly connected, the system will display No USB device
found. during operations about the USB flash drive.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
7.1.17
is displayed in the status bar.
190