Yamaha T8 Rigging Manual page 214

Outboard Rigging Guide - 2001
4. Insert the outer sheave of the remote control
cable for shifting into the housing clamp so
that the groove on its end fits over the ridge
in the clamp. Fit the cable joint over the pin,
on the end of the shift arm, and lock it with
the circlip.
5. Fit the grommet (accessory) in the clamp
groove.
704 Binnacle Mount Remote Control Ass'y.
6. Connect the remote control cable for the
throttle to the throttle arm in the same man-
ner.
YAMAHA
MARINE
GREASE
7. Secure the back plate and mounting flange
firmly, with the five screws, and fit the pack-
ing in place.
8. After installing the remote control cables,
temporarily secure the remote control box to
the predetermined position with the screws
and nuts (accessories).
4-27