Electrolux EWM09312 Service Manual page 20

Description
Communication error between
main PCB and display board
Communication inconsistency
between main PCB and display
board. (incompatible versions)
Appliance configuration error
Incorrect configuration of
washing cycle
Inconsistency between
programme selector and cycle
configuration
Display board configuration error • Display board faulty
Communication error between
main board and display board
No drum position signal made.
No signal from the DSP during
motor activation.
Electronically controlled valve
blocked with operating flowmeter
AGS current sensor faulty
Technical Support - A.D.L.
Possible fault
• Faulty wiring.
• Control/display circuit board faulty.
• Main circuit board faulty.
• Incorrect control/display board.
• Incorrect PCB (does not correspond to the model)
• Main circuit board faulty.
• Incorrect configuration data.
• Main circuit board faulty.
• Incorrect configuration data.
• Main circuit board faulty.
• Incorrect configuration data.
• Faulty wiring.
• Display board faulty.
• Main board faulty.
• DSP sensor faulty.
• Transmission belt broken.
• Main circuit board faulty.
• Faulty wiring.
• DSP sensor faulty.
• Transmission belt broken.
• Main circuit board faulty.
• Faulty wiring.
• Faulty wiring.
• Solenoid valve faulty/blocked.
• Circuit board faulty
• Faulty wiring.
• Main board faulty.
Cycle blocked
Cycle blocked
Cycle blocked
Cycle blocked
Drum positioning cycle cancelled
Cycle paused.
Cycle stops with door locked
Drain pump continues to operate (5 min. on, then
5 min. off. etc.)
Spin speed reduced to safety speed.
20/70
Action
Machine status
---------------- RESET
ON/OFF
ON/OFF
ON/OFF
RESET
START
---------------- ON/OFF
RESET
---------------- ON/OFF
START/RESET
START
RESET
RESET
RESET
599 74 23-12 Rev.00
Reset