Table of Contents
Advertisement
Frequently Asked Questions
Cleaning the lint filter in the
condensed water container
In some circumstances, there can be
problems running the Steam Care pro-
gram. The lint filter at the end of the
hose which is connected to the rubber
seal in the condensed water container
could be blocked.
Remove the condensed water con-
tainer.
Pull out the spout. Remove the spout
by holding the side lug and pulling
upwards.
To avoid detaching the hose, be
careful not to tug on it.
68
Guide the end of the hose through
the opening and hold it securely with
one hand.
Use your other hand to pull the lint fil-
ter off the hose.
Rinse the lint filter with a jet of water
until all the lint has been removed.
Refit the cleaned lint filter onto the
hose.
Now feed the hose with its lint filter
attached into the condensed water
container.
Refit the spout in the condensed wa-
ter container ensuring that it is posi-
tioned correctly. Please refer to the
image.
Advertisement
Table of Contents
