Table of Contents
Advertisement
General problems with the tumble dryer
Problem
You can hear operating
noises (buzzing/hum-
ming).
A program does not
start.
The display is dark and
the Start/Stop sensor
button is flashing
slowly.
The tumble dryer is
switched off at the end
of the program.
The display is in a dif-
ferent language.
The interior drum light-
ing does not come on.
Frequently Asked Questions
Possible cause and solution
This is not a fault.
The compressor (heat pump) is operating or you have
selected the Steam Care program.
No action required. These noises are quite normal
and can be heard when the compressor or the
condensed-water pump is operating.
There is no obvious cause.
Connect the power plug.
Turn on the tumble dryer.
Close the door.
Check whether the fuse has tripped.
Power outage? When power is restored, any previ-
ously running program will restart automatically.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
Press any button. This switches Standby off.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol will
guide you.
Not a fault. The drum lighting switches off automati-
cally in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
63
Advertisement
Table of Contents
