Condensed Water Container; Emptying The Condensed Water Container - Miele 11 631 610 Operating Instructions Manual

Heat-pump dryer
Table of Contents

Advertisement

Emptying the condensed water
container
The condensed water is collected in
the condensed-water container.
Empty the condensed-water container
after every drying program.
When the maximum level in the con-
densed-water container is reached, the
following message lights up in the dis-
play:
Empty the container or check the
drain.
To delete the message:
 Open and close the door (with the
dryer switched on).
 Remove the condensed water con-
tainer.
 To prevent water from running out,
keep it in a horizontal position when
carrying it. Hold the condensed water
container at the front and towards the
back.

Condensed water container

 Empty the condensed water con-
tainer.
 Replace the condensed water con-
tainer in the dryer.
It can cause health problems in peo-
ple and animals.
Do not drink condensed water.
The condensed water can be used for
the Soft Steam program. The con-
densed water container must be filled
to use this program (see the following
section).
45

Advertisement

Table of Contents
loading

Table of Contents