Huawei FusionModule500 V100R021C10 User Manual page 41

FusionModule500 Smart Mini Data Center
User Manual
(5) COM1/AIDI_4
(9) LAN2/POE
(13) AIDI_3
(17) 4G
Figure 3-10 ECC800-Pro main control module (side view)
(1) SIM card slot
Technical Specifications
Table 3-12 Technical specifications of the ECC800-Pro main control module
Item
Power input
Power output
WAN port
LAN port
Issue 01 (2020-11-30)
(6) COM3/12V
(10) WAN2
(14) DO/12V
(18) SW button
Specifications
● Supports one AC input
● Rated voltage: 200–240 V AC
● Rated frequency: 50/60 Hz
● Output voltage: 42–58 V DC (rated voltage: 53.5 V DC)
● Output power of two power modules: 2000 W (200–240 V
AC); 940 W (linear derating at 85–175 V AC)
● Output power of a single power module: 1000 W (200–240
V AC); 470 W (linear derating at 85–175 V AC)
● Supports two WAN ports. WAN1 is used to connect to the
management system, and WAN2 is used for maintenance.
The ports support autonegotiation of 10/100/1000 Mbit/s
communication rates.
● Connect shielded network cables to the WAN ports.
● Supports two LAN ports, which can be connected
southbound devices. The ports support autonegotiation of
10/100/1000 Mbit/s communication rates.
● Connect shielded network cables to the LAN ports.
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
(7) WAN1
(11) COM4/CAN
(15) RF_Z
(2) Micro-SD card slot (reserved)
(8) LAN1/POE
(12) COM2/AIDI_5
(16) WLAN
32