Huawei FusionModule500 V100R021C10 User Manual page 157

FusionModule500 Smart Mini Data Center
User Manual
Step 2 Commission cameras and set parameters for them. For details, see the delivered
documents.
1.
2.
Issue 01 (2020-11-30)
Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
On the View tab page, click the Network/Time tab to access the Network/
Time tab page.
Figure 5-22 Setting the IP address
Table 5-17 IP address parameters
Parameter
IPv4 address
assignment
IPv4 address
IPv4 gateway
IPv4 subnet
mask
Primary DNS
Secondary DNS
Copyright © Huawei Technologies Co., Ltd.
Description
Method for obtaining the IP address. The options are
Obtain IP address automatically and Use the
following IP address. The default value is Obtain IP
address automatically.
Camera IP address. This parameter is available only
when IPv4 address assignment is set to Use the
following IP address.
Enter the planned IP address, for example,
192.168.1.161. IP addresses starting with 127 are
invalid. You must enter an IP address starting with a
value that ranges from 1 to 223.
Gateway IP address of the network where the camera is
located. The default value is 192.168.0.1.
Subnet mask of the network where the camera is
located. The default value is 255.255.255.0.
Primary DNS IP address. The default value is 0.0.0.0.
Secondary DNS IP address. The default value is 0.0.0.0.
5 Power-On Commissioning
148