Check Electrical Harnesses And Fuses - Hitachi ZW 180-6 Operator's Manual

Wheel loader

Hide thumbs Also See for ZW 180-6:

Table of Contents

Check Electrical Harnesses and Fuses

--- every 50 hours

CAUTION: If dirt or dust is adhered on the wirings or

relays, it may cause fire on the machine.

Check the electrical harness and terminals of the batteries,

starter motor, and alternator for loose connection and/or short

circuit (broken shield). Remove dirt or dust if necessary.

If any burned mark or an abnormal smell is noticed at a

harness, consult your nearest authorized dealer.

Replace Fuse:

1. If any electrical equipment becomes inoperable, first

check the fuses in the fuse boxes (A, B) located in the left

console in the operator's station.

2. One spare fuse for each respective fuse capacity is

provided in the fuse boxes (A, B).

3. Finally, check slow blow fuses (1) (2) located on the

inside of the battery box.

1- 70A, 140A

2- 45A, 65A (2 used)