Inspection/Maintenance Side Access Cover - Hitachi ZW 180-6 Operator's Manual

Inspection/Maintenance Side Access Cover

d
CAUTION:
 Never attempt to stand on fender (2) if side cover
(1) is provided with fender (2).
 Always close side covers (1) when moving and/or
operating machine.
 Do not keep the side cover open on a slope or
when a strong wind is blowing.
Failure to do so may be dangerous because the
side cover may unexpectedly move or close.
 Take care not to pinch fingers when opening/
closing side cover (1).
 When side cover (1) is opened, the cover may
move suddenly. Be careful not to come in contact
with the cover.
 Before inspecting around the engine, be sure to
secure side cover (1) with holding rod (4).
When opening side cover (1), pull latch (3).
f
NOTE: When servicing the machine for a long time
with side cover (1) kept open, lock side cover (1) using the
holding rod (4) located inside the side cover.
Side cover (1) has a holding groove. Engage the holding
rod (4) in the holding groove securely.
OPERATOR'S STATION
1-135
1 2
3
MNEK-01-009
4
MNEK-01-010