Auto Idling Stop - Hitachi ZW 180-6 Operator's Manual

Auto Idling Stop

d
WARNING: This function automatically stops
the engine. Carefully operate within the work
environment when using this function.
When the auto idling stop function is ON (enabled), the
engine automatically stops after the preset time from the
state in which the specified conditions are met (see the
operating condition on the next page).
30 seconds before the engine stop, monitor (2) displays a
message that engine will be stopped and indicator (1) starts
flashing. Also the buzzer sounds. The buzzer sounds once at
30 seconds before, intermittently sounds from 15 seconds,
and then stops after 15 seconds.
The auto idling stop is disabled and the engine will not stop
if any of the conditions on the next page is not satisfied.
IMPORTANT: Ensure that the ON or OFF status of auto
idling stop indicator (1). If the indicator is ON, the
auto idling stop function will be activated.
OPERATING THE MACHINE
5-9
2
MNEK-01-153EN
MPD8-01-100EN
1