Check Electrical Harnesses And Fuses - Hitachi ZW 310-6 Operator's Manual

Check Electrical Harnesses and Fuses

--- every 50 hours
Check the electrical harness and terminals of the batteries,
starter motor, and alternator for loose connection and/
or short circuit (broken shield). If any burned mark or a
burning odor is noticed at a harness, consult your nearest
authorized dealer.
Replace Fuse:
1. If any electrical equipment becomes inoperable, first
check the fuses in the fuse boxes (A, B) located in the
right console (behind the front control lever) in the
operator's station.
2. Two each spare fuse for respective fuse capacities is
provided in the fuse boxes (A, B).
3. Finally, check slow blow fuses (1) (2) located on the
left side of the machine.
1- 120 A x 2
2- 70 A, 140 A
MAINTENANCE
Machine
Front side
7-88
Fuse box A
Battery box
1
2
Fuse box B
90Z7B-FuseBox
90Z7B-SlowBlow