GE FVP110 Maintenance Manual page 229

Parameters of AR (Arithmetic)
Relative Index Parameter
Index
11 17511 OUT_RANGE
12 17512 GRANT_
DENY
13 17513 INPUT_OPTS 0
14 17514 IN
15 17515 IN_LO
16 17516 IN_1
17 17517 IN_2
18 17518 IN_3
19 17519 RANGE_HI
20 17520 RANGE_LO
21 17521 BIAS_IN_1
22 17522 GAIN_IN_1
23 17523 BIAS_IN_2
24 17524 GAIN_IN_2.
25 17525 BIAS_IN_3
26 17526 GAIN_IN_3
27 17527 COMP_HI_LI
M
28 17528 COMP_LO_LI
M
Table 67 AR (Arithmetic) Block Parameters (Continued)
Default
Name (factory
setting)
0
0
0
0
0
0
0
0
0
0
0
Write
This is the display scaling for the output. It has
no effect on the block. It is used by many
blocks.
Option to control access from the host
computer and local control panel to tuning and
alarm parameters
Option bit string for handling the status of the
auxiliary inputs.
The primary input value of the block, required
for blocks that filter the input to get the PV.
Input for the low range transmitter, in a range
extension application.
Numbered input required by this block.
Numbered input required by this block.
Numbered input required by this block.
Constant value above which the range
extension has switched to the high range
transmitter.
Constant value below which the range
extension has switched to the low range
transmitter.
The constant to be added to IN_1.
The constant to be multiplied times (IN_1 +
bias).
The constant to be added to IN_2.
The constant to be multiplied times (IN_2 +
bias).
The constant to be added to IN_3.
The constant to be multiplied times (IN_3 +
bias).
The high limit imposed on the PV
compensation term.
The low limit imposed on the PV compensation
term.
213
Function Block Parameters
Description