GE FVP110 Maintenance Manual page 203

Parameters of Resource Block
Relative Index Parameter
Index
37 1037 ALARM_SUM Enable
38 1038 ACK_
OPTION
39 1039 WRITE_PRI
40 1040 WRITE_ALM
41 1041 ITK_VER
42 1042 SOFT_REV
43 1043 SOFT_DSC
44 1044 SIM_ENABLE
_MSG
45 1045 DEVICE_STA
TUS_1
46 1046 DEVICE_STA
TUS_2
47 1047 DEVICE_STA
TUS_3
48 1048 DEVICE_STA
TUS_4
49 1049 DEVICE_STA
TUS_5
50 1050 DEVICE_STA
TUS_6
Table 60 Resource Block Parameters (Continued)
Default
Name (factory
setting)
0XFFFF
0
—
4
—
—
Null
0
0
0
0
0
0
Write
Shows the alarm summary for all blocks within
the device (FVP110).
Defines the acknowledgment action of each
alarm type.
By setting a bit to 1, the corresponding alarm
will behave as acknowledged immediately
when it occurs without receipt of
acknowledgment from the host.
Defines the priority level of WRITE_ALM as
well as allows for notification to be disabled
and makes acknowledgment unnecessary for
WRITE_ALM.
— Alarm generated when WRITE_LOCK is set to
unlocked
— Version number of the inter-operability test kit
— Revision number of software
— Revision number of software for development
purpose.
— Used to determine whether to enable the
simulation function to run. To enable, set
"REMOTE LOOP TEST SWITCH".
— Shows device statuses - mainly link object
setting statuses.
— Shows device statuses - mainly individual for
each block status.
— Shows device statuses - mainly the contents of
XD_ERROR in each block.
— Not used in the FVP110.
— Not used in the FVP110.
— Not used in the FVP110.
187
Function Block Parameters
Description