System - Sony BCU-100 Maintenance Manual

1-9-7. System

System check
When forming a cluster system using the BCU-100, the status of each unit can be monitored by SNMP.
In addition, when a control PC is mounted, the system can be monitored as a cluster system by the open
source and commercial system control software.
By connecting the terminal PC to the Syscon Controller via RS-232C, the power on/off operation for the
BCU-100 can be controlled, and the information such as temperature and fan rotation speed can be
obtained.
For details, refer to the vendor who designed the system.
Ethernet (SNMP)
BCU-100
Front RS-232C port
RS-232C cross cable (or USB – RS-232C conversion cable + RS-232C – RS-232C cross cable)
Terminal PC
BCU-100 MM
System control PC
Diagnose each unit separately
using the diagnostic software in
an offline state.
Monitor the system condition by
the system control software.
Check the self-diagnostic status of the
start-up and during operations with the
LEDs on the front of the unit.
1-45 (E)