Huawei SmartAX MA5600T Hardware Description page 99

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
SW2-3
OFF
OFF
OFF
NOTE
Table 2-7 Settings of SW2-5 and SW2-6
SW2-6
ON
ON
OFF
OFF
NOTE
Table 2-8 Settings of SW2-7 and SW2-8
SW2-8
ON
ON
OFF
OFF
NOTE
Issue 24 (2018-07-30)
SW2-2
ON
OFF
OFF
When SW2-1, SW2-2, and SW2-3 are used to set the subnode address, make sure that the DIP switch
settings are consistent with the data configuration. But the subnode address value cannot be the same as
that of the environment monitoring board.
SW2-5
ON
OFF
ON
OFF
Four fans are configured in the ETSI fan tray (FCBB) of the MA5600T.
SW2-7
ON
OFF
ON
OFF
The ETSI fan tray (FCBB) of the MA5600T must use speed adjustment policy 3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SW2-1
OFF
ON
OFF
Speed Adjustment Mode
Temperature measurement at
the air intake vent (reserved)
Temperature measurement at
the air exhaust vent
Temperature measurement at
the air intake vent
Temperature measurement at
the air intake vent (the fan stops
rotating)
2 Subrack and Chassis
Address Value
5
6
7
Fan Quantity
6
8
4
10
Adjustment Strategy
Strategy 1
Strategy 2
Strategy 3
Strategy 4
79