Huawei SmartAX MA5600T Hardware Description page 934

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
PWRA, PWRB, PWRC, PWRD: 1st, 2nd, 3rd, and 4th power input LEDs
Green: on
Red: on
Monitoring Port
The monitoring ports of the I-type DC PDU include the serial port and the ports for
monitoring boolean parameters, as shown in
Figure 6-6 Monitoring ports of the I-type DC PDU
Table 6-4
monitoring boolean parameters of the I-type DC PDU.
Table 6-4 Monitoring serial ports of the I-type DC PDU
Serial Port
COM1
COM2
COM3
Issue 24 (2018-07-30)
JTM1
JTP1
COM1
JAB1
JAK1
COM2
JAK2
RUN
JAK3
ALM
describes the monitoring serial ports, and
Function
(Reserved)
RS-485 monitoring
port
(Reserved)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The input voltage ranges from -38.4 V to -72
V.
The input voltage is below -38.4 V.
Figure 6-6.
JTD1
JTD2 JTA1 JAC1
JTD3 JAC2
JTD4
JTA2
JTD5
JTD6 JTA3
JTD7
COM3
JTS1
JTA4
Table 6-5
Connection
-
Use the environment monitoring cable to connect
the port to the ESC port of the control board.
-
6 Electromechanical Device
describes the ports for
914