Esd Jack; Grounding - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Figure 2-31 Fan status transfer

2.6.5 ESD Jack

The ESD jack of the MA5608T chassis is on the middle of the fan tray, which is used to
connect the ESD wrist strap to prevent device damage caused by electrostatic discharge.
The position of the MA5608T chassis ESD jack, as shown in
Figure 2-32 Position of the MA5608T chassis ESD jack

2.6.6 Grounding

This topic describes the grounding principle of the MA5608T chassis and the position of the
ground point.
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Subrack and Chassis
Figure 2-32.
138