Hitachi NAS Platform 4000 Series Hardware Reference Manual page 49

Item Connectivity
1 Clustering ports 10 GbE
(SFP+)
2 10 GbE network ports
(SFP+)
3 8 G FC storage ports
(SFP+)
4 n/a
5 and n/a
6
7 n/a
8 Power supply units:
PSU 1
PSU 2
9 I/O ports
10 I/O ports
11 IPMI port
12 RS-232
13 Video port
Chapter 4: Hitachi NAS Platform server components
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
Server rear panel - models 4060, 4080, and 4100
Quantity
2 For cluster management and
heartbeat, connect to:
Two way configuration: Connect to
■
corresponding cluster server ports
(top port to top port and bottom
port to bottom port).
N-way configuration: Connect to 10
■
GbE switch.
4 Connection to external Ethernet data
network .
4 Connection to disk arrays or (where
present) to the FC switches.
Status LEDs (NVRAM, power, and
server), and Power and Reset buttons.
2 Plastic handles.
Caution: Do not lift the
server by these handles.
2 Holes for mounting the power supply
cable retention clasps.
2 Connect to the rack's Fault group:
PSU 1 to Fault group A
■
PSU 2 to Fault group B
■
Keyboard (purple) and mouse (green)
ports. (Reserved for Customer Service
Engineer access only.)
2 USB port. (Reserved for Customer
Service Engineer access only.)
1 Can be used for Remote Management.
For further information, visit Hitachi
Support Connect.
1 Management interface. (Reserved for
Customer Service Engineer access only.)
1 Video management interface port.
(Reserved for Customer Service Engineer
access only.)
Description
49