Hitachi NAS Platform 4000 Series Hardware Reference Manual page 121

Procedure
1. Log in to the server.
2. Run the nas-preconfig script.
The IP addresses are assigned at this step.
3. Reboot if you are instructed to by the script.
4. Log in to the SMU using one of the IP addresses you obtained once they can
successfully connect using ssc localhost.
5. Use a KVM (keyboard, video, and mouse) or a serial cable to connect to the serial
port on the server.
Alternatively, you can connect by way of SSH using the following settings:
115,200 b/s
■
8 data bits
■
1 stop bit
■
No parity
■
No flow control
■
VT100 emulation
■
6. Log in as root (default password: nasadmin), and enter ssc localhost to access
the BALI level command prompt.
7. Enter evs list to see the IP configuration for the server.
8. Using a supported browser, launch the NAS Manager using either one of the IP
addresses acquired from the EVS list output.
9. Click Yes to proceed past Security Alert, and log in as admin (default password:
nasadmin).
10. Verify and, if necessary, convert the new server to the model profile required.
This step requires a separate process, training, and license keys. Contact Hitachi
Vantara if the incorrect model arrives for replacement.
11. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
12. Navigate to Home > Server Settings > Cluster Wizard, and promote the node to
the cluster.
13. Enter the cluster name, cluster node IP address, subnet, and select a quorum
device.
Note that the node reboots several times during this process.
14. When prompted, add the second node to the cluster.
15. Enter the physical node IP address, log in as supervisor (default password:
supervisor), and click finish.
Wait for the system to reboot.
16. Enter smu-uninstall to uninstall the embedded SMU.
17. Navigate to Home > Server Settings > Configuration Backup & Restore, locate
the desired backup file, and then click restore.
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unified Storage Series 4000 Hardware Reference
Configuring the replacement servers
121