Bosch CL300 Manual page 146

Software Description
System Range Code List
Representation of Constants
5−24
SM28.0−28.7 Error Byte
SM28.0 Module Stack Error
SM28.1 Opcode Error
SM28.2 Addressing Error
SM28.3 Module Management Error
SM28.4 Controller Addressing Error
SM28.5 Parameter Error
SM28.6 C/T Set−point Error
SM28.7 Cycle Time Error
S0 (Bit 1) I/O allocation list desired
S0 (Bit 2) Copy data module to data buffer
S2 Main software watchdog (factor * 10 ms)
S4 Time base definition for time−controlled processing in
OM5
S6 Time base definition for time−controlled processing in
OM6
S8 Defining length and number of module to be coied
S10 Defining the limiting (byte) address for marker
remanency
S12 Defining the limiting (byte) address for timer
remanency
S14 Defining the limiting (byte) address for counter
remanency
S16−S46 Set allocation lists for input and output modules
S16−S22 4 words for input allocation
S24−S30 4 words for output allocation
S32−S38 4 words for extended input allocation
S40−S46 4 words for extended output allocation
K0000000000000000B−K1111111111111111B
K000000O−K177777O
K00000D−K65535D
K0000H−KFFFFH
K"AB"
K0C−K8191C
K0.TB−K999.TB
Timer value
Time values are not entered directly, but with a time base indication.
TB = 0 10 ms
TB = 1 100 ms
TB = 2 1 s
TB = 3 10 s
Flexible Automation
Binary value
Octal value
Decimal value
Hexadecimal
value
2 ASCII char
acters
Counter value