Table of Contents
Advertisement
Section 5
Technical Information
5-1. Route Function
5-1-1. Outline
This is a function to display the expanded source name when 2 switchers are combined to expand the
input.
Source name that is actually selected will be displayed by following the source connected to the route
destination when the route setting is performed.
There also is a function to automatically switch the cross-point in the route destination side when the
switching including the expanded destination is requested.
In the following example, by using the route function to expand the IN005 of Switcher2 to IN001 to
IN004, and to output the input signals from IN001 to IN004 to OUT017, it can secure the communication
route from remote control in one action, and display the expanded source name (IN001 to IN004) to the
cross-point status of OUT017.
At this time, the level of Switcher 1 and that of Switcher 2 must be the same.
IN002
IN004
IN001
IN003
OUT001
Switcher 1
IN006
IN008
IN005
IN007
OUT017
Switcher 2
5-1
BKS-R3219A/R1617A I&SSM
Advertisement
Table of Contents
