Table of Contents
Advertisement
2-5. Rack Mounting
To install the unit into a rack, have the four binding-head
screws (+B5 x 10) ready.
Secure the front panel of the unit to the rack with the screws.
Installation Procedure
Attach the BKS-R6010 to a 19-inch rack as described
below.
1. Loosen the two screws on the both sides of the front
panel, and remove the bracket ornaments.
BKS-R3219A/R1617A
2. Attach the unit to the rack, and fix it with the four
+B5x 10 screws (optional).
+B5x10 screws
3. Attach the bracket ornaments as they were, and fasten
the screws.
2-4
B K S
- R 6 0
1 0
Bracket ornament
19-inch rack
2-6. For Use in an OB Van
When the BKS-R3219A/R1617A is to be used in an OB
van, be sure to band the cables to a rack strut to avoid
having the weight of cables add to vibration shock to the
connector on the rear panel during transport.
L bridge
Rack strut
Band
2-7. Matching Connectors
Use the following connectors and cables, or equivalents
when connecting cables to the unit.
Panel
Connector Matching connector and cable
indication
name
Name
REMOTE 1 BNC, 75 Z Belden 8281 coaxial cable
or
Belden 1694 coaxial cable
REMOTE 2 D-sub 9-pin, D-sub 9-pin, Male
Female
Connector 9-pin, Male
Junction Shell 9-pin
RS232C
D-sub 9-pin, D-sub 9-pin, Female
Male
Connector 9-pin, Female
Junction Shell 9-pin
*1 : The following crimp contact is required for the plug.
AWG#20 to #24 : 1-566-352-11
AWG#24 to #28 : 1-566-353-11
*2 : The following crimp contact is required for the socket.
AWG#24 to #26 : 1-563-814-11
BKS-R3219A/
R1617A Rear panel
Y bridge
Sony part No.
_
1-566-354-21
*1
1-563-375-11
1-563-815-21
*2
1-563-375-11
BKS-R3219A/R1617A I&SSM
Advertisement
Table of Contents
