Miele ProLine Operating And Installation Instructions page 10

Warning and Safety instructions

While the wok is under warranty repairs should only be under-
taken by a Miele authorised service technician. Otherwise the war-
ranty is invalidated.

Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.

The wok is not intended for use with an external timer switch or a
remote control system.

Connection to the gas supply must be carried out by a suitably
qualified gas fitter (e.g. a Gas Safe registered technician in the U.K).
The hob may be connected to the electrical supply by a fused plug
and switched socket. If you wish to connect it to a fused spur con-
nection, or if the plug has been removed or the connection cable is
not supplied with a plug, the hob must be connected to the mains
supply by a suitably qualified electrician.

If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
"Electrical connection" in the "Installation" chapter).

During installation, maintenance and repair work, the wok must be
completely disconnected from the mains electricity supply. The gas
inlet valve must be closed. It is only completely isolated from the
electricity supply when:
- the mains fuse has been disconnected or
- the screw-out fuse is removed (in countries where this is applic-
able),
- the plug (if present) is removed from the socket. To do this, pull
the plug not the mains connection cable.
- The gas inlet valve is closed.
10