Maintenance - Kenwood DM-S500 Instruction Manual

Dm-s500 instruction manual
Hide thumbs Also See for DM-S500:
Table of Contents

Advertisement

Handling of Mini Disc
46
As the Mini Disc is accommodated inside a cartridge, it can be handled
without caring about dust or fingerprint. However, stained or soiled
cartridge may cause malfunction. To enjoy beautiful sound for ex-
tended period of time, take care on the following points.
Do not touch the disc directly.
Do not touch the disc by opening the shutter with your hand. The
cartridge will be damaged if it is forced open.
Storage position
Do not leave Mini Discs in place where the temperature and/or humidity
are extremely high (for example, in a place subject to direct sunlight).
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
1. With no disc loaded in the unit, press the ON/STANDBY
key to on.
÷ Check that no disc is present in the unit.
2. Wait a few seconds and verify that the display shown
appears.
3. Press the ON/STANDBY key to off (standby).

Maintenance

Cleaning
Unplug this appliance from the wall outlet before cleaning. Do not use
volatile solvents such as alcohol, paint thinner, gasoline, or benzine,
etc. to clean the cabinet. Use a clean dry cloth.
Care
Wipe periodically dust and dirt attached on the cartridge with a dry
cloth.
Write protect tab
To protect recorded contents against accidental erasure, set the write
protect tab of the disc open. Return the tab to the original position when
you want to record signals on the disc.
Disc back side
Slide open.
(Recording disabled)
D I S C
N O
I
Caution against contact revitalizer
Do not use contact cleaners because it could cause a malfunction. Be
specially careful against contact cleaners containing oil, for they may
deform the plastic componente.
Important items
DM-S500 (En)
Write protect tab
Slide close.
(Recording enabled)
L
( dB)
30 10 5
3
1
0
R

Advertisement

Table of Contents
loading

Table of Contents