Table of Contents
Advertisement
Note on connection of optical-fiber cable
The optical-fiber cable is designed for use in the connection of the
CD player. The digital signal transmission makes it possible to
record the high-quality sound of CDs without degradation.
÷ Insert the optical-fiber cable straight into the connector until it clicks.
÷ Be sure to attach the protection cap when the connector is not used.
÷ Never bend or bundle the optical-fiber cable.
SYSTEM CONTROL CONNECTIONS
After hooking this unit up with the KENWOOD System "SERIES 21," connect the system control cords for convenient system control
operations between the connected devices.
When hooking this unit up with the System "SERIES 21," read the instruction manuals supplied with the AV CONTROL CENTER (sold
separately) or the receiver (sold separately).
Notes
Notes
1. Do not connect system control cords to any components other than
those specified by KENWOOD. It may cause a malfunction and
damage your equipment.
2. Be sure the system control plugs are inserted all the way in to the
system control terminals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote control unit (GRC-151, GRC-102 or GRC-101).
Automatic Operation
Automatically switches the input selector on the AV CONTROL CENTER or receiver when you start playback from this unit.
Synchronized Recording
Lets you synchronize recording with the start of playback when recording from CD.
See the operating instructions supplied with your CD player or VIDEO-CD LD player for details.
System connections
DM-S500 (En)
7
Advertisement
Table of Contents
