Maintenance - Kenwood DM-SE7 Instruction Manual

Handling of Mini Disc
As the Mini Disc is accommodated inside a cartridge, it
can be handled without caring about dust or fingerprint.
However, stained or soiled cartridge may cause malfunc-
tion. To enjoy beautiful sound for extended period of
time, take care on the following points.
Do not touch the disc directly.
Do not touch the disc by opening the shutter with your
hand. The cartridge will be damaged if it is forced open.
Storage position
Do not leave Mini Discs in place where the tempera-
ture and/or humidity are extremely high (for ex-
ample, in a place subject to direct sunlight).
Note related to transportation and movement
Before transporting or moving this unit, carry
out the following operations.
1. With no disc loaded in the unit, press the "on/
standby" key to on.
¶ Check that no disc is present in the unit.
2. Wait a few seconds and verify that the display
shown appears.
3. Press the "on/standby" key to off (standby).

Maintenance

Cleaning
Unplug this appliance from the wall outlet before clean-
ing. Do not use volatile solvents such as alcohol, paint
thinner, gasoline, or benzine, etc. to clean the cabinet.
Use a clean dry cloth.
Unplug power cord
Care
Wipe periodically dust and dirt attached on the
cartridge with a dry cloth.
Write protect tab
To protect recorded contents against accidental
erasure, set the write protect tab of the disc open.
Return the tab to the original position when you
want to record signals on the disc.
Disc back side
Slide open.
(Recording disabled)
N O I D I S C
Caution against contact revitalizer
Do not use contact cleaners because it could cause a
malfunction. Be specially careful against contact clean-
ers containing oil, for they may deform the plastic
componente.
9
Before operation
DM-SE7(En)
Write protect tab
Slide close.
(Recording enabled)
L
( dB)
30 10 5 3 1 0
R