Sony RB1G Service Manual page 230

4-18. NON network function of RDS(Remote diagnosis)
5. Meaning of each items
NO ITEMS
Model Name TV model name is displayed
1
2
Serial Number TV serial number is displayed.
Used for same meaning as "Service Tag". This ID is to
3
identify the TV. Each TV has its own Device ID. This is used
Device ID: for network service. Server identifies TV with this ID. More
information of network service can be searched by SPOC
system with this ID.
Software
4
Display TV software package version
Version
Display Wired LAN MAC address or N/A(when Wired Lan
5
Wired MAC
adapter is not selected).One MAC address from Wired or
Address:
Wireless network adapter only can be displayed
Display Wireless LAN MAC address or N/A(when Wireless
6
Wireless MAC Lan adapter is not selected).
Address: One MAC address from Wired or Wireless network adapter
only can be displayed
7
Wired IP Display Wireless LAN IP address or N/A(IP address is not
Address: assigned at Wireless LAN adapter)
8
Wireless IP Display Wired LAN IP address or N/A(IP address is not
Address: assigned at Wired LAN adapter)
9
Current Input Display selected input source
10
Current Display selected channel number or N/A(when no channel is
Channel selected)
EXPLAINATION
NO ITEMS
11 Signal Display RF signal strength(not used, display is not
Strength(%) accurate.
12
Display signal quality of RF signal(not available except
FAT SNR(dB)
U/C, but not always available. It depends on channel)
13
Display signal quality of RF signal(not available except
Post-Viterbi BER
U/C)
14
Display HDMI CEC control is ON or OFF.
CEC Settings
#15~#18 are only available when CEC setting is ON.
Display HDMI equipment name connected at HDMI 1
15
Input 1 Model input. Displayed name is depend on the HDMI
Name equipment. Display N/A when no HDMI equipment is
connected.
Display HDMI equipment name connected at HDMI 2
16
Input 2 Model input. Displayed name is depend on the HDMI
Name equipment. Display N/A when no HDMI equipment is
connected.
Display HDMI equipment name connected at HDMI 3
17
Input 3 Model input. Displayed name is depend on the HDMI
Name equipment. Display N/A when no HDMI equipment is
connected.
Display HDMI equipment name connected at HDMI 4
18
Input 4 Model input. Displayed name is depend on the HDMI
Name equipment. Display N/A when no HDMI equipment is
connected.
DTC-IPKey Display DTCP-IP key installation status. Installed or not
19
Install Status installed.
20
MarlinBB Key Display Marlin BB key installation status. Installed or
Install Status not installed.
RB1G CHASSIS
W600A/ W603A/ W605A/ W607A/ W650A/ W651A/ W653A/
W654A/ W655A/ W656A/W657A/ W658A/ W670A/ W674A
EXPLAINATION
230