Cold Plate With Internal Liquid Cooling; Principle Of Internal Liquid Cooling - Siemens SINAMICS S120 Equipment Manual

Cold plate with internal liquid cooling

3.1

Principle of internal liquid cooling

With internal cold-plate liquid cooling, connectors ("connection adapters") are required
directly on the cold plate for connecting the water supply. These connection adapters are
available for 300 mm wide power units (see section "Connection adapters").
The following principle applies:
Inlet below, outlet above
Figure 3-1 Principle of the cooling water circuit
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
3
33