Directives And Standards - Siemens SINAMICS S120 Equipment Manual

14.1.3

Directives and Standards

The following directives and standards apply within the European Union:
Table 14-1 EC Directives
Directive
73/23/EEC
98/37/EC
89/336/EEC
Conformance with the harmonized standards is an indication of conformance with the basic
requirements of these laws.
The following table lists some application-relevant Standards:
Table 14-2 Standards
Standard
EN 292–1
EN 292–2
EN 418
EN 563
EN 894-1
EN 894-2
EN 954–1 and BGL. 1
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
Description
Directive of the Council of February 19, 1973, on the approximation of the laws of the member
states relating to electrical equipment designed for use within certain voltage limits
Low-Voltage Directive
Directive of the Council of August 12, 1998, on the approximation of laws of the member
states relating to machinery
Machine Directive
Directive of the Council on the approximation of laws of the member states relating to
electromagnetic compatibility
EMC Directive
Description
Safety of machinery
General design principles
Part 1: Basic terminology, methodology
Safety of machinery
General design principles
Part 2: General requirements
Safety of machinery
Emergency stop equipment
Functional aspects; principles for design
Safety of machinery
Temperatures of touchable surfaces
Ergonomics data to establish temperature limit values for hot surfaces
Safety of machinery
Ergonomic requirements for the design of displays and control actuators
Part 1: General principles for human interactions with displays and control actuators
Safety of machinery
Ergonomic requirements for the design of displays and control actuators
Part 2: Displays
Safety of machinery
General design principles
Part 1: Safety-related parts of control systems and supplement 1
Cabinet Design and EMC
14.1 Information
303