For HP Internal Use Only
Cabinet Removal and Replacement
This section describes the procedure for replacing a damaged part. Refer to Table 8-4 for a
list of the cabinet parts that can be replaced if damaged.
The 1.1 meter and 1.6 meter cabinet are identical except for vertical height. All parts are
removed and replaced the same. For this reason, only the 1.6 rneter cabinet is shown. The
only parts that are different between the 1.1 meter cabinet and 1.6 meter cabinet are the rear
door, top cap, base cover, and side covers.
Refer to Figure 8-31 and Figure 8-32 while performing the procedures outlined in this section.
Replaceable Parts
8-57