Integrated Access Port Selftest Failure Codes - HP 3000 Series Handbook

For HP Internal Use Only
Table 5-41. Integrated Access Port Selftest Failure Codes
Element Part Under
Description Destructive
Number Test Test
0
Reserved.
1 8-port MUX 8-port MUX short test. Yes
12
18-port
MUX
I
Complete test contains
all
tests
I
Yes
that check the 8-port MUX board only.
3
68000 68000 test. Yes
4 ROM ROM test (C.R.C).
Yes
5 RAM
RAM test. Yes
7 OCT ART Test channel registers port x. No
8-14 Reserved.
15 OCT ART
Check various statuses . . . port x. No
16-22 Reserved.
23 OCT ART
Check channel hardware (Mux) port x. No
24-30
Reserved.
31
ADP Test with quadriloop on ADP port x No
32-38 Reserved.
39 OCT ART Check Xon/Xoff at global level. Yes
40 OCT ART Test w /r OCT ART global registers. Yes
41 OCT ART Test all ports with global link at Yes
the OCTART's output.
42 OCT ART Check interrupt capabilities. Yes
43 OCT ART Check modem features. Yes
44 OCT ART Check global timer. Yes
45 OCT ART Check vector generation. Yes
46 QANAT Check QANAT hard. related to port x. No
47-53 Reserved.
54 QANAT Check QANAT hardware related to SE. Yes
55-79 Available.
80 8-port MUX Poweron selftest. Yes
81 8-port MUX Non-destructive selftest for AP. Yes
82 8-port MUX Test list called by AP's TA command.
No
83 EEPROM CRC test for EEPROM. No
84
OCT ART
Front panel loop back test.
Yes
85
RAM Harmless RAM test
No
86 EEPROM Manufacturing NVM Test.
No
87 EEPROM NVM Status check. Note: always fails. No
88-90 Available.
91 ADP
Test ADP with loopback connector. No
92-99 Available.
Troubleshooting 5-41