Isl Boot Codes; Mpe/Ix Isl Boot Codes - HP 3000 Series Handbook

For HP Internal Use Only
ISL Boot Codes
Table 5-31. ISL Boot Codes
Code
Description
OxOO No error currently detected. In process of initializing or
using this device
OxOl Could not find ENTRY _INIT (IODC Driver)
Ox02 Error while executing ENTRY _INIT (IODC Driver)
Ox03 Could not find ENTRY _10 (IODC Driver)
Ox04 Error while executing ENTRY _10 (IODC Driver)
Ox05 Device class of device indicates it is not bootable
Ox06 LIF Magic on boot media is not Ox8000
Ox07 IPL address on boot media is either 0 or not 2K aligned
Ox08 IPL size on boot media is 0, greater than maximum, or
not 2K aligned
Ox09 IPL entry address on boot media is not within range
of IPL addresses or is not word aligned
OxOA IPL on boot media does not checksum correctly
MPE/iX ISL Boot Codes
Table 5·32. MPE/iX ISL Boot Codes
Display
Description
CE40 MMSAVE Launched
CE41 Establish first available free memory
CE42
Align input buffers for DMA transfer
CE43 Initialize I/0 driver pointers
CE44
Write welcome message to console
CE46
Reading LIF volume label
CE47 Getting values from volume label
CE48
Reading LIF directory
CE49 Find disk address and size of DUMP AREA LIF file
CE4A DUMPAREA found. Start writing to disk
CE4B Memory written to DUMPAREA. Proceeding to ISL
CE4C Finding ISL disk address and size
CE4D Reading ISL
CE4E Launching ISL
CE4F Writing error message
CE50
Calling IODC to write message to console
CE51 Configuring memory controllers
CE52 Completed memory controller configuration
5-36 Troubleshooting