Measurement (M5)
Setting zeros, workpiece measuring and tool measuring
In the case of the tool position of two milling tools with one reference point, not only are the
input variables of measurement type 23 evaluated but also the values of the following input
variables:
Approach direction and tool orientation +x
$AC_MEAS_TOOL_MASK = 0x2
$AC_MEAS_DIR_APPROACH = 0
694
Approach direction and tool orientation -x
$AC_MEAS_TOOL_MASK = 0x40 +200
$AC_MEAS_DIR_APPROACH = 1
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions